Custom Waterproof Food Tamper Evident Sealing Stickers for Bottles and Jars
Cold cases, warm kitchens and delivery bags test a seal; our custom waterproof food sealing stickers are made to stay legible and whole on the closure. Cut to your dieline, the same format serves as tamper evident labels on jars, bottle labels on a drinks line, flat seal stickers on cartons, and waterproof labels where containers meet condensation. Each piece pairs a paper face, water-based glue and a release liner; thickness follows the application. CMYK, PMS or unprinted stock, foil and matte or glossy lamination keep the mark sharp through handling. A lifted cap corner makes a jar look opened, so glue and slit placement follow the closure. Rolls or sheets suit manual or automatic lines.
Dielines Cut to the Closure, Not to a Catalogue
Shape is the first decision on a sealing label. We die-cut to your artwork outline, a wrap-around band for a carrier, a T-tab across a box lid, or a small round mark centered on a cap. The same dieline can carry bottle labels on glass and jar labels on wide-mouth packs, because the cut follows the closure you actually use rather than a stock template. Edges are held clean so the liner peels without dragging the face, and the slit that reveals opening is placed where it will register when the seal is broken. Tell us the closure diameter and we will draw the dieline to it, then send a cut sample before the run starts.
Tamper Evidence Built into the Adhesive Layer
Tamper evidence here is a physical result, not a printed warning. The face is scored so that breaking the seal leaves a visible split, and the glue is selected so the label cannot be peeled away and pressed back into place unnoticed. Our tamper evident labels use food-grade water-based adhesive and a paper face that tolerates chilled display and brief steam exposure without curling at the rim. On flat lids, the same build works as seal stickers that bridge lid and body. If the slit is intact when the container arrives, the pack has not been disturbed. Decide the slit position during dieline review, because it has to match the way your cap or lid opens.
Waterproof Face, Print and Finish Choices
The face stock is chosen to shed surface moisture, so waterproof labels stay readable when a bottle sweats in a cooler or a jar is wiped down before service. Ink sits on a printable surface: CMYK for photographic artwork, PMS when a brand colour must match from run to run, or no print at all for a plain closure band. Glossy or matte lamination changes how the mark catches the light; foil stamping adds a small metallic accent without covering the tear path. Thickness is set per order, so a narrow cap seal and a broad front band do not have to share one caliper. Finish samples let you check legibility before the full run.
Roll, Sheet and Sampling for Real Lines
Labels leave the plant in the format your line uses. Roll supply suits higher-volume bottle labels running through a labelling head; sheet supply suits short runs and hand application at a packing bench. Because every outline is custom, we cut the liner and the face together, so an irregular shape still feeds without drifting. Stock samples are free, quick samples take three days, and a printed run follows an eight to twelve working day window. That leaves time to test the seal on the real closure and confirm the band lies flat on a jar shoulder. For multi-item launches we keep each dieline on file, so a reorder matches the first delivery.
| Material | Paper+Waterbased glue+Release paper(Thickness is Customized) |
| Dimensions | All Custom Sizes & Shapes |
| Color | CMYK Printing, PMS Printing as your request |
| Advantages | Low MOQ, Fast Delivery, FREE Design, etc |
| MOQ | 20,000 |
| Sample Fee | Samples in stock are FREE |
| Lead Time | 8–12 working days |
| Product Process | Foil Stamping/Custom Shape/Glossy or Matt Lamination, etc |
| Application | Bottled Drinks, Jarred Foods, Takeaway Packaging, Food Service, and Other Food Packaging |
All-round Custom Options
Explore More Packaging Solutions
See our 5 inch, 6 inch boxes, single cupcake inserts and mini cake boards all made in the same certified facilities.
Disposable Cups
Custom hot & cold cups for cafes and QSRs, combining convenience with brand impact.
Paper Food Boxes
Grease-resistant boxes for Cake, burgers, noodles, and meals, secure and easy to carry.
Paper Bags
Eco-friendly takeaway bags with strong handles, ideal for bakery and retail branding.
Disposable Cups
Leak-proof bowls for soups, salads, and rice, perfect for dine-in or delivery.
Paper Food Buckets
Sturdy buckets for fried chicken, popcorn, or family meals, built for big portions.
Eco-friendly Packaging
Sustainable packaging made from compostable materials, designed to protect food and the planet.
Showcase of Success Stories
Lavazza cafe patisserie, Hangry Joe's individual desserts, Sushi Bar mini cakes and Shokuh gift collections use our 4 inch cake boxes for daily service and events.
Packaging Upgrade for Lavazza’s U.S. Franchise Expansion
We supported Lavazza, a world-renowned specialty coffee chain, in upgrading its franchise packaging for the U.S. market. The new solution delivered consistent brand identity, sustainable materials, and improved functionality, helping their franchises enhance customer experience and meet local standards.
Customized Takeout Packaging for U.S. Sushibar Chain
We partnered with a U.S. sushi bar chain to solve challenges in their takeaway packaging. By providing tailored solutions, we reduced overall packaging costs while ensuring food safety, branding, and delivery efficiency.
Streamlined Overseas Packaging Procurement for Shokuh Patisserie
We supported Shokuh Patisserie, a luxury dessert brand from Dubai, in completing its first overseas packaging purchase. Our solution simplified the sourcing process, improved procurement efficiency, and helped reduce overall costs without compromising premium quality.
Complete Packaging Upgrade for Hangry Joe’s Expansion
We partnered with Hangry Joe’s, a U.S. fast-food chain, to upgrade their entire packaging line. The solution strengthened brand consistency, improved cost efficiency, and supported their rapid franchise growth.
Applications
Multi-Certifications for Trust
FDA Compliance
Packaging materials meet U.S. FDA requirements for safe food contact.
NSF Certified
Independent verification for food safety and public health compliance.
SIRA Tested
Products evaluated by recognized inspection and certification experts.
SGS Verified
Independent testing and verification by SGS to ensure quality and safety.
In-house Production Facility
1. Raw Material Management
Paper face, water-based adhesive and release liner are checked on arrival for thickness, slack and spread before entering the press line. Each lot that becomes waterproof labels is logged against its supplier batch, so a moisture fault traces to one delivery. Stock is kept flat and dry until cutting.
2. Printing & Production
Tooling cuts each outline from the approved dieline, including tabs, wrap bands and the bridge that carries the split. Ink is cured before lamination, so foil and varnish sit on a stable surface. Finished seal stickers are checked for clean edges and readable type against the artwork file.
3. Quality Assurance
One sample from each lot of tamper evident labels goes onto the specified closure, then lifts at the slit to confirm the break appears where the dieline placed it. Peel resistance and edge lift are checked after a short chill cycle. The lot is held until that split passes.
4. Warehousing & Delivery
Finished bottle labels and jar labels are counted, wound or stacked to the format you ordered, then wrapped against surface moisture. Each carton carries the dieline reference and print version, so a mixed order needs no sorting. Rolls use a consistent core for predictable feeding.
A scored line in the face does the work. When the closure is lifted, the paper breaks along that line and leaves a gap that cannot be hidden by pressing the label back down. We place the score during dieline review, because a cap and a swing lid break in different places. The adhesive is chosen to resist a clean peel as well, so removal leaves visible residue or torn fibre. If your product needs the signal on the lid rather than the neck, tell us the closure type and we will reposition the split before sampling.
It depends on the closure surface and how long the pack stays wet, so we choose the adhesive from those conditions rather than promise one compound for every jar. Tell us the container material, the diameter, and whether it goes through refrigeration, hot filling or a greasy handling area. Our own line runs the peel and condensation checks; you do not need to ship food to us. A label that stays flat in a short chill cycle can still lift after long soaking, so we will state the tested boundary in the sample notes.
Often yes, provided the liner and face are cut together and the shape keeps a steady spine for the head to grip. During dieline review we look at the narrowest bridge, the radius of each corner and the direction the label leaves the liner. A very fine point or an undercut usually needs a wider web, and we will say so before tooling. Send the label size and the head model, and we will prepare a roll sample for a feed trial on your line.
Use CMYK when the artwork is photographic or carries many tones. Choose PMS for a single brand colour that must match across repeat orders, because a spot ink stays consistent where process build-up can drift. Foil stamping suits a small accent such as a seal mark; it should not cross the scored line, where it would crack. Matte lamination softens glare under retail lighting, while glossy gives higher contrast on a dark label. Keep the unprinted option for a plain closure band where the break itself is the only message.










